Putting Kleen & Dri Towels to Work For You!
Correct Technique For Using Kleen & Dri Towels:
By using Kleen and Dri Towels you get a true one-step routine that will help you achieve fully stimulated cows while increasing operator efficiency in the parlor. But, to get this, the correct technique for using Kleen and Dri Towels must be followed.

1. Brush-The correct technique involves first brushing loose dirt off the teat.
2. Forestrip- Then fore stripping onto the cow platform in a parlor, or into the gutter or strip cup in a stanchion barn, without getting milk on your hands.
3. Wipe-Next-using a Kleen and Dri Towel and beginning with the teat farthest away from you-wipe down and around the teat to clean the sides of the teat.
4. Wipe-Finally, wipe across the teat opening with a clean section of the Kleen and Dri Towel.

Compared to a two-step pre-dip routine, Kleen and Dri is the tool that will help you milk your cows faster and get you the greatest amount of high-quality milk because you clean, sanitize, and stimulate in one step with less walking and bending.

For best results, stimulate teats until they are flush with milk and attach the unit immediately. Align the unit for even milkout.
When the cow is milked out, remove the unit at once! Be sure takeoffs are properly adjusted. DO NOT OVERMILK!

Benefits of Good Stimulation:

• Faster milking=time savings
• Increased milk harvest=more$$$
• Less teat end damage=lower SCC
• Lower SCC=high production
• Higher production=improved profits
• Increased profits=happier dairy producer

Keep Your Vacuum Pump In Tip-Top Shape

Vacuum Pump Check List:

• Check vacuum level at gauge/manometer each day.
• Check vacuum filter for cleanliness every 50 hours or weekly.
• Check all drain valves for proper sealing every 50 hours or weekly.
• Check moister trap, check ball for effectiveness every 250 hours or monthly.
• Clean fresh air filters every 250 hours or monthly.
• Check vacuum pump, check valve for effectiveness every 1500 hours or every 6 months.
• Verify accuracy of vacuum gauge every 1500 hours or every 6 months.
• Replace vacuum filter screen every 3000 hours or yearly.
• Flush and clean all vacuum lines and components every 3000 hours or yearly.
• Have your Bou-Matic dealer perform a complete system analysis every 3000 hours or yearly.

Seehafer Refrigeration, Inc.
M402 Mann Road Hwy. 97 North
Marshfield, WI 54449 Phone-(715)387-3789 or 1-800-700-Doug
Webmaster